Industrial Heaters

Product Details:

Shree Pedkai Engineering Commercial & Industrial Heaters excellent in performance and durability and Primarily used in pharmaceutical, textile & plastic industry.

Additional Information:

• Production Capacity: 100 number per day
• Delivery Time: within week
• Packaging Details: standard

Product Details:

Construction: Made from M.S., S.S and Or Titanium Pipe with square or round plate for mounting, with replaceable refractory insulated heating element inside.
 
Applications: In Water, Oil, foodstuff, alkaline solutions, anodizing & plating baths etc.Lead bonded heaters are used in phosphoric acid, chromic acid etc. Titanium heaters are used in Nitric & Chromic acid solutions.
 

Additional Information:

• Production Capacity: 100 Units per day
• Delivery Time: Within Week

Product Details:

Construction:It is made of imported fused silica tubing with remountable heating element inside, provided with heat resistance rubber cap and connecting cable.

 

Applications: High temperature in all acids ferric chloride etching baths, anodizing, bright dip baths, except hydrofluoric and phosphoric.

 

Additional Information:

• Delivery Time: Within Week

Product Details:

Open coil wind heaters are air heaters that expose the maximum heating element surface area directly to an airflow
Applications:

Air Duct heating

Furnace heating

Tank heating 

Pipe heating 

Metal tubing

Ovens

Additional Information:

• Production Capacity: 100 Units per day
• Delivery Time: Within 2 Days
• Packaging Details: Standard

Product Details:

Our range of Cast In Heaters are made using brass or aluminum and is available in a variety of standard designs & styles so some time also known as Aluminum Cast Heater. Tubular heaters act as the heat source for cast-in-heaters and can be made in any configuration to accommodate any practical cast-in-heater shape.

Features:
• Available with end fittings for cooling tubes
• Excellent workmanship
• Uniform surface temperature
• Efficient heat transfer

Additional Information:

• Production Capacity: 100 Units per day
• Delivery Time: Within Week
• Packaging Details: Standard

Product Details:

CIRCULATION HEATERS

STANDARD FEATURES:

Pipe body chamber

1. All welded constuction

2. 100 % pressure testing

3. Sizes upto 24 inch diameter

4. Vertical & horizontal models available

5. Either mounting brackets or saddles are available

6. Drained plugs wherever applicable are available

7. Large selection of inlet & outlet sizes available

 

Heating elements

1. S.S. 304, S.S. 316, INCOLY 800 sheathed material available

2. Heavy wall thickness (0.8 mm), large diameter (11mm)

 

Spacers

1. Rugged design high temperature alloy material

2. "Even Flow" configuration standard

 

Additional Information:

• Production Capacity: 100 Units per day
• Delivery Time: Within Week
• Packaging Details: Standard

Product Details:

Our range of Cast In Heaters are made using brass or aluminum and is available in a variety of standard designs & styles so some time also known as Aluminum Cast Heater. Tubular heaters act as the heat source for cast-in-heaters and can be made in any configuration to accommodate any practical cast-in-heater shape.

Features:

• Available with end fittings for cooling tubes
• Excellent workmanship
• Uniform surface temperature
• Efficient heat transfer

Additional Information:

• Production Capacity: 100 Units per day
• Delivery Time: Within Week
• Packaging Details: Standard

Product Details:

The construction of micro tubular heater are in round, square or rectangular section manufactured out of S.S. 304, Incoloy 800 tube to guarantee the greatest thermal exchange. This heaters are also known as high performance tubular heater.

They are usually installed where space is at a premium.

 

Standard sizes for coil heaters:

Round: φ 3 mm, φ 4 mm, φ 5mm

Square: 3.2 x 3.2 mm, 3.5 x 3.5 mm

Please specify the following details to order:

 

Inner diameter, outer diameter, wattage, voltage, cable length, heater length, with thermocouple or without thermocouple.

Additional Information:

• Production Capacity: 100 Units per day
• Delivery Time: Within Week
• Packaging Details: Standard

Product Details:

We bring forth Water and Oil Immersion Heaters for the customers. These are widely used for varied kinds of industrial purposes and are made using best quality raw material. We also offer reasonably priced Mild Water & Oil Immersion Heaters Steel Channels. With our perseverance, we have managed to acquire a prime position as a manufacturer, supplier and exporter of these products.

 

Further information is outlined as follows:

Additional Information:

• Production Capacity: 100 Units per day
• Delivery Time: Within Week
• Packaging Details: standard

Product Details:

We manufacture Furnace heating element which are durable and made with superior quality nichrome  as raw material. We provide a range of furnace heaters which are widely used in packaging, plastics, textile, automotive, rubber and many other industries.

Additional Information:

• Production Capacity: 100 units per day
• Delivery Time: Within a week

Product Details:

Pedkai manufacture the Deep fat fryer heaters as per customers specification & requirement . The important feature are sufficient watt density which prevents over heating & burning of Oil.In commercial application the quality of the Oil is key for the product quality & health effects using deep fat fryer. Heating of the Oil in flow through heaters extends the life of expensive Oil.Sufficient cold zone kept to increase the heater life even if the oil level drops.

Features:

• Electric heating tube in S.S 304/316
• High mechanical strength & thermal efficiency
• Safe & Reliable

Additional Information:

• Production Capacity: 100 Units per day
• Delivery Time: Within Week
• Packaging Details: Standard

Product Details:

CONSTRUCTION:- Heater is made up of specific Nickel Chrome resistance wire supported in Fluted refractory, sheathed in M.S. Plated, Stainless steel or Brass, provides the best combination of physical strength, high emissivity & good thermal conductivity to heated surface essential for good heater life.

 

APPLICATIONS: - Provides black heat in Ovens, Industrial and Commercial heating chambers, Convertors,

Panel Boards, Forced air ducts, blower units, Etc.

Additional Information:

• Production Capacity: 100 Units per day
• Delivery Time: Within Week
• Packaging Details: Standard

Product Details:

We manufacture Air Heater With Fins & Clamps which are durable and made with superior quality steel as raw material. We provide a range of air heaters which are widely used in packaging, plastics, textile, automotive, rubber and many other industries.

Additional Information:

• Production Capacity: 100 Units per day
• Delivery Time: within week
• Packaging Details: Standard

Product Details:

Standard features of ring heaters for flat surface heating applications:

1. Flat surface

2. Rugged constructions

3. Quick heating

4. Light weight

5. Flexible wattage

Sizes available for half sheathed ring heater (one side metal other side cement):

 

Sizes available for closed type ring heater (one side metal other side cement):

Additional Information:

• Production Capacity: 100 Units per day
• Delivery Time: Within Week
• Packaging Details: Standard

Product Details:

We are bound to provide a wide range of Automatic Vending Machine Heating Elements to the clients. Further, these products are manufactured using the latest technology and advanced machinery. These Automatic Vending Machine Heating Elements are highly reliable as these are fabricated using optimum quality material.

We are involve in offering superior quality Tea / Coffee Maker Heating Elements. These Tea / Coffee Maker Heating Elements are made from high quality of raw material which ensure durability at its user end.

Additional Information:

• Production Capacity: 100 Units per day
• Delivery Time: Within Week
• Packaging Details: Standard

Product Details:

Leveraging on our extensive experience, we bring forth Short Wave Infrared Heaters. These heaters are made with quality raw material sourced from veritable vendors of the market. Furthermore, the end products are put through strict and thorough quality tests, which makes them the best range in the market. We strive to provide the products within the budgetary expectations of the customers.

Additional Information:

• Production Capacity: 100 Units per day
• Delivery Time: Within Week
• Packaging Details: Standard

Product Details:

Construction: Made from Titanium Pipe with square or round plate for mounting, with replaceable refractory insulated heating element inside.
 
Applications: In Water, Oil, foodstuff, alkaline solutions, anodizing & plating baths etc.Lead bonded heaters are used in phosphoric acid, chromic acid etc. Titanium heaters are used in Nitric & Chromic acid solutions.

Product Details:

Leveraging on our extensive experience, we put forth Pad Heaters for the customers. There is a widespread demand for these heaters in the market. Moreover, these are specifically appreciated for their robustness and exceptional durability. We deliver the products within the time period stipulated in the contract and endeavor to provide the range at competitive market prices.
 
Specifications regarding the products are as follows:

Attributes of Pad HeatersKeeps the atmosphere pleasant : the radiation is minimized by its 2 inch thick insulating pad, to keep the surrounding pleasant.
Shock proof : the elements in the heater are insulated with fiber glass yarn to make it completely shock proof
Reduces production loss : lowers initial heat up time. During power failure the heat will be stored inside the barrel thus offering quick restart of machine
Investment recovery : its noteworthy power saving pays back the investment cost in a short span of time
Flexibility : offers a perfect contact between barrel & the heater without any air gap
lower power consumptionApplicationsIndustrial usage

Additional Information:

• Production Capacity: 100 Units per day
• Delivery Time: Within Week